Bow tie in leather

Learn how to make your own bow tie made from leather with this DIY tutorial.

Butterfly i læder - DIY guide

Step 1

Cut out a template in a square the size, you want your bow tie to be. Place the template on top of the leather and cut. Remember to make room for seam allowance.

Butterfly i læder - DIY guide. Step 1

Step 2

Fold the leather and use your sewing machine to sew a seam. You don’t need to sew the entire side – leave a bit of room unsewn to be able to turn the bow tie. After this, fold the seam allowance into the middle and sew both ends.

Butterfly i læder - DIY guide. Step 2

Step 3

Cut off the corners to make them look a bit pointier, when the right side of the leather faces outwards.

Butterfly i læder - DIY guide. Step 3

Step 4

Cut a strap of leather that will be tied around the bow tie.

Butterfly i læder - DIY guide. Step 4

Step 5

Sketch out a long straight strap for the neckpiece and cut it out. 

Butterfly i læder - DIY guide. Step 5

Step 6

Fold the small leather piece that you made in step 4. Lay the leather on top of it (see picture for reference).

Butterfly i læder - DIY guide. Step 6

Step 7

Sew the small leather piece around the bow tie by using a needle and thread. If it’s difficult to get the needle through the leather, use a flat nose plier to ease the process.

Butterfly i læder - DIY guide. Step 7

Step 8

Punch a hole for snaps with your rotary leather punch.

Butterfly i læder - DIY guide. Step 8

Step 9

Use the snap setter to install the snaps. Please note that the snaps have a top and a bottom.

Butterfly i læder - DIY guide. Step 9

Step 10

You can install more than one bottom part, which will make it possible to adjust the length of the bow tie.

Butterfly i læder - DIY guide. Step 10

Products for this project

You can buy a package deals with or without tools, or you can buy the products individually. The guide can be downloaded as a PDF file, so that you can print it out.

Leather remnants

Snaps + snap setter

Scissors

Punch tong

Flat nose plier

Sewing machine

 

Cardboard for template